Ozzistraightshooter Digital Torque Wrench ideal for Gunsmith use. 1/4 inch drive.

This compact digital torque wrench is perfect for tightening scope mounting screws and for 
getting the correct torque on rifle action screws.

It gives readings in metric and imperial units so you can set torques easily in inch-lbs.
Nice large display is easy to read.
It can read torques on small screws for scope mountings but is strong enough to handle tight
action screws.
The torque wrench is only 230mm long so is very ergonomic for small screws.
The leverage of the handle helps to give you great control while you gradually apply torque.

You can preset a torque value and the device will beep intermittently as you get close to the 
target torque value. It beeps continuously when you reach the target torque.

In addition to the torque wrench you get a set of accessories and tips to suit that are useful for 
many jobs on firearms.

The kit includes the following

1/4 inch drive digital torque wrench (useful up to 250 inch lbs)
Standard 1/4 inch drive ratchet
Screwdriver style handle for 1/4 inch drive tips and sockets.
T style 1/4 inch drive bar.
Flexible extension shaft
Short extension (50mm)
Long extension (100mm)
Angle swivel coupling
1/4 inch drive sockets in metric sizes
4mm,4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm,
Straight blade screwdriver tips; 3 sizes small, medium and large.
Philips screwdriver tips; 6 sizes.
Allen hex tips; 3mm, 4mm, 5mm, 6mm, 7mm, 8mm.
TORX tips; T10, T15, T20, T25, T30, T40.

Tighten scope mounts and action screws to values according to manufacturers 
recommendations.

Typical torque values for scope mounts are in the range of 15-25 inch lbs.
Action screws are usually in the range 40-60 inch lbs.

Powered by 2x AAA batteries.

Made in China, but quality manufactured with 12 months warranty.